The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the slotted tube holder. The end of the tube is drilled twice with Ø 9.0 mm.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the two threaded pins. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The two threaded pins clamp the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube end is drilled through twice with Ø 9.0mm.
The tube connector connects a tube parallel to the screw-on surface. The two threaded pins clamp the tube end in the tube connector. The tube does not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects a tube parallel to the screw-on surface. The two grub screws clamp the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is connected to the tube connector by clamping two half shells. The tube end is drilled through once with Ø 9.0mm.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The threaded pin clamps the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube end is drilled through with Ø 9.0 mm.
The tube connector connects a tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube does not need to be drilled.
The tube connector connects a tube plumb to a floor surface and is suitable for holding skirting boards. The threaded pins clamp the tube end and the skirting boards. The tube and the skirting boards do not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects a continuous tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube does not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The tubes do not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The tubes do not need to be drilled.
The tube connector is used as a double partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and clamps two partitions at the same time. The tubes do not need to be drilled.
The tube connector is used as a double partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and clamps two partitions at the same time. The tubes do not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The partition wall is drilled through with Ø 9.0mm. The tubes do not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects two tubes in one axis. The tube connector is connected to the tube ends by clamping two half shells. The two tube ends are drilled through with Ø 9.0 mm.
The tube connector is used as a disc holder. The discs are fixed with plastic screws. The tube connector is screwed or riveted to the tube. These fixing materials are not included in the scope of delivery.
The tube connector is used as a panel support. Due to the slotted tube receptacle, this tube connector can be fixed at any position of the tube. The tubes do not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the slotted tube holder. The end of the tube is drilled twice with Ø 9.0 mm.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the two threaded pins. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The two threaded pins clamp the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube end is drilled through twice with Ø 9.0mm.
The tube connector connects a tube parallel to the screw-on surface. The two threaded pins clamp the tube end in the tube connector. The tube does not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects a tube parallel to the screw-on surface. The two grub screws clamp the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is connected to the tube connector by clamping two half shells. The tube end is drilled through once with Ø 9.0mm.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The threaded pin clamps the tube end in the tube connector. The tube does not need to be drilled.
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube end is drilled through with Ø 9.0 mm.
The tube connector connects a tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube does not need to be drilled.
The tube connector connects a tube plumb to a floor surface and is suitable for holding skirting boards. The threaded pins clamp the tube end and the skirting boards. The tube and the skirting boards do not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects a continuous tube parallel to the screw-on surface. The tube end is clamped in the tube connector by the slotted tube holder. The tube does not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The tubes do not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The tubes do not need to be drilled.
The tube connector is used as a double partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and clamps two partitions at the same time. The tubes do not need to be drilled.
The tube connector is used as a double partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and clamps two partitions at the same time. The tubes do not need to be drilled.
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The partition wall is drilled through with Ø 9.0mm. The tubes do not need to be drilled.
Our universal tube connectors are made of high quality aluminium alloys in accordance with DIN EN 1706. We manufacture them for tube diameters of 30, 40 and 60 mm. We also manufacture special pipe connectors or other diameters upon request. If desired, we can also supply all of the connectors with a polished, brushed or coated surface and V2A screw connections. The universal pipe connectors offer a wide range of uses. All-in-one system solutions We don’t leave you to fend for yourself. In addition to supplying the tubing and connectors, our service includes consulting and a drawing if you wish, so that the assembly can be carried out quickly and easily. We would also be happy to provide you with pre-assembled components. +49 2371 8080-0 We’re here ready to answer any questions about our universal-tubular-fittings.
The tube connector connects two tubes in one axis. The tube connector is connected to the tube ends by clamping two half shells. The two tube ends are drilled through with Ø 9.0 mm.
The tube connector is used as a disc holder. The discs are fixed with plastic screws. The tube connector is screwed or riveted to the tube. These fixing materials are not included in the scope of delivery.
The tube connector is used as a panel support. Due to the slotted tube receptacle, this tube connector can be fixed at any position of the tube. The tubes do not need to be drilled.