Our tube connectors for tubes with a diameter of 60 mm are used wherever particularly high demands are placed on stability and safety.
Ø 60 mm tube connectors are particularly frequently used in fence construction and for barriers in public spaces. They are used, among other applications, on tennis courts, sports facilities, and in public areas.
Ø 60 mm tube connectors therefore offer the ideal combination of stability, safety, and durability for demanding fence and barrier systems.
8 Products
10 | Floor and Ceiling Bracket, 60 mm
The tube connector connects a tube vertically to a floor, ceiling or wall surface. The tube end is clamped in the tube connector by the two threaded pins. The tube does not need to be drilled.
from €17.34*
16 | Divider Clamp, 60 mm
The tube connector is used as a partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and at the same time clamps the partition. The tubes do not need to be drilled.
from €12.30*
16 a | Divider Clamp – double, 60 mm
The tube connector is used as a double partition wall holder. By clamping two half shells, the tube connector is fixed to the tube and clamps two partitions at the same time. The tubes do not need to be drilled.
from €13.84*
31 | Elbow Part 60 mm
The tube connector connects two tubes to form a 90° angle. The threaded pins clamp the tube ends in the tube connector. The tubes do not need to be drilled.
from €11.72*
51 | Cross Connector, 60 mm
The tube connector connects two tube ends and a continuous tube at 90° angles. By clamping two half-shells, two tube ends and a continuous tube are joined to form a cross. The tubes do not need to be drilled.
from €15.86*
52 | Cross Connector, 60 mm
The tube connector connects two tube ends and a continuous tube at 90° angles. The three threaded pins clamp the single-shell tube connector onto the tubes. The tubes connected to form a cross do not need to be drilled.
from €14.42*
71 | T-Connector, 60 mm
The tube connector connects a tube end and a continuous tube at a 90° angle. The three threaded pins clamp the single-shell tube connector onto the tubes. The tubes connected to form a T do not need to be drilled.
from €11.53*
73 | Double Clamp, 60 mm
The tube connector connects two tubes in parallel. By clamping two half shells, two continuous tubes with a centre distance of 132mm are connected in parallel. The tubes do not need to be drilled.
from €15.27*